TWP 3D Printer accessories Automatic Leveling Module Film Pressure Probe Type Auto-leveling Sensor For E3D V6 MK8 Makerbot Nozzles
TWP 3D Printer accessories Automatic Leveling Module Film Pressure Probe Type Auto-leveling Sensor For E3D V6 MK8 Makerbot Nozzles by TWP at Awesome Attorney. MPN: AUTO-01. Hurry! Limited time offer. Offer valid only while supplies last. Note: Do not use the leveling sensor when the nozzle temperature is higher than 45 degrees! Shipping list: Auto-leveling module with cable * 1set
Product Description & Reviews
Note: Do not use the leveling sensor when the nozzle temperature is higher than 45 degrees!
Auto-leveling module with cable * 1set
(Just the module and cable, the nozzles show in the pictures are NOT included.)
As shown in the figures above(The 9th picture）, the black wireframe is the effective printing range of the printing platform. When the leveling point is set to 4 points in the system, the value selection points of auto-leveling probe on the printing platform will be all the red dots as shown above. All these red dots divide the printing platform into small squares or rectangles. Then the system will store the data for all points in the system. As a result, the print platform is divided into multiple small platforms. After leveling, when the print head moves, the system will take the measurement data of the four points around the area according to the real-time running area of the print head, and then calculate the real-time height compensation amount of the print head according to the data, to reach the goal of leveling the whole platform. For the Delta model printers, after detecting, it will expand the dead zone data based on the surrounding data.
Auto Leveling Parameters Description:
X-axis direction offset: the offset of the leveling probe relative to the print nozzle in the X-axis direction
Y-axis direction offset: the offset of the leveling probe relative to the printing nozzle in the Y-axis direction
Z-axis direction offset: the distance from the platform to the print head when the leveling probe detects the platform
Probe stowed angle: the angle of the servo for the leveling probe when the probe is stowed/retracted/up (can ignore this when not in use)
Probe open angle: the angle of the servo for the leveling probe when the probe is deployed/down (can ignore this when not in use
Connection of the film pressure leveling probe and the motherboard shows in the 8th picture!
Features & Highlights
- Easy to be used. Can be applied to different types of 3D printers. The default trigger distance is 0.1mm.
- High precision, leveling repeatability can be ± 0.05mm.
- The average service life of the module is more than 500,000 times.
- Compatible with almost all the 3D printer motherboards in the current market
- Good anti-interference ability, will not be affected by the platform material, ambient light, ambient temperature and humidity, etc.
3D Printer Parts & Accessories
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by TWP, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 408164-0725-xzus, ean: 0715444743115,
Specification£ºModel: Reprap Ramps 1.5Color: black + blueRange: 3D printer partsProduct size: 11.3*6.5*2.5cmProduct manual:1. It has the specifications for Cartesian robots and extruders.2. Expand to control and other accessories.3. Heater/fan outp...
mpn: HPCL411ASA, ean: 0083351633523,
TonerBoss remanufactured HP 305A toner cartridges is a combo pack of four including one each of CE410A black toner, CE411A cyan toner, CE412A yellow toner, and CE413A magenta toner. Our remanufactured toners are made to meet quality and performance s...
mpn: JHQ-Office0907-thinkYJ013, ean: 6954248423517,
Product Description:Product category: Print StickerModel: 200*200mm magnetic stickerSuitable type: 200*200 hot bed printerAdvantages: easy to use, no residue left.Packing including:1 * Print StickerNote: Due to manual measurements, there may be 1-3 c...
mpn: NF-TC-01, ean: 0730060989105,
Note: This hotend kit can be used as single color printing or dual colors printing, but not for mixing colors. Description Applicable filament: 1.75mm PLA/ABS Nozzle size:0.4mm, please let us know if you need other sizes. Feeding mode: remote feeding...